XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.25-epia1 (shamim@ventus.languid.org) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #5 Wed Feb 25 18:23:59 PST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 26 15:45:19 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/lib,/usr/X11R6/lib/modules,/usr/X11R6/lib/modules/extensions" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3123 card 1106,aa01 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0d:0: chip 1106,3044 card 1106,3044 rev 80 class 0c,00,10 hdr 00 (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00 (II) PCI: 00:11:0: chip 1106,3177 card 1106,aa01 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,aa01 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,aa01 rev 50 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 74 class 02,00,00 hdr 00 (II) PCI: 00:14:0: chip 109e,036e card 1461,0002 rev 02 class 04,00,00 hdr 80 (II) PCI: 00:14:1: chip 109e,0878 card 1461,0002 rev 02 class 04,80,00 hdr 80 (II) PCI: 01:00:0: chip 1106,3122 card 1106,3122 rev 03 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI: (0:20:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xde003000/12 (--) PCI:*(1:0:0) VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics rev 3, Mem @ 0xd8000000/26, 0xdc000000/24 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff (II) Active PCI resource ranges: [0] -1 0 0xde004000 - 0xde004fff (0x1000) MX[B] [1] -1 0 0xde002000 - 0xde0020ff (0x100) MX[B] [2] -1 0 0xde001000 - 0xde0010ff (0x100) MX[B] [3] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [5] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) [6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [7] -1 0 0xde003000 - 0xde003fff (0x1000) MX[B](B) [8] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [9] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [10] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [11] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B] [12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [14] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xde004000 - 0xde004fff (0x1000) MX[B] [1] -1 0 0xde002000 - 0xde0020ff (0x100) MX[B] [2] -1 0 0xde001000 - 0xde0010ff (0x100) MX[B] [3] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [5] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) [6] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [7] -1 0 0xde003000 - 0xde003fff (0x1000) MX[B](B) [8] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [9] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [10] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [11] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B] [12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [14] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xde004000 - 0xde004fff (0x1000) MX[B] [6] -1 0 0xde002000 - 0xde0020ff (0x100) MX[B] [7] -1 0 0xde001000 - 0xde0010ff (0x100) MX[B] [8] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [10] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) [11] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [12] -1 0 0xde003000 - 0xde003fff (0x1000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [17] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [18] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B] [19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [21] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.0.1 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "glx" (II) Loading /lib/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /lib/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Reloading /usr/X11R6/lib/modules/linux/libdrm.a (II) Loading extension XFree86-DRI (II) LoadModule: "via" (II) Loading /usr/X11R6/lib/modules/drivers/via_drv.o (II) Module via: vendor="The XFree86 Project" compiled for 4.3.0, module version = 4.1.30 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) v4l driver for Video4Linux (II) via: driver for VIA chipsets: CLE266, KM400, K8M800 (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset CLE266 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xde004000 - 0xde004fff (0x1000) MX[B] [6] -1 0 0xde002000 - 0xde0020ff (0x100) MX[B] [7] -1 0 0xde001000 - 0xde0010ff (0x100) MX[B] [8] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [10] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) [11] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [12] -1 0 0xde003000 - 0xde003fff (0x1000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [17] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [18] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B] [19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [21] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xde004000 - 0xde004fff (0x1000) MX[B] [6] -1 0 0xde002000 - 0xde0020ff (0x100) MX[B] [7] -1 0 0xde001000 - 0xde0010ff (0x100) MX[B] [8] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [10] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) [11] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [12] -1 0 0xde003000 - 0xde003fff (0x1000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [20] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [21] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B] [22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [24] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B] [25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) VIA(0): Depth 16, (--) framebuffer bpp 16 (==) VIA(0): RGB weight 565 (==) VIA(0): Default visual is TrueColor (**) VIA(0): Option "ActiveDevice" "CRT,TV" (**) VIA(0): Option "TVType" "NTSC" (**) VIA(0): Option "TVOutput" "S-Video" (**) VIA(0): Option "TVVScan" "over" (==) VIA(0): Using HW cursor (==) VIA(0): Not using video BIOS to set modes (**) VIA(0): Active Device is CRT and TV. (**) VIA(0): TV Type is NTSC (**) VIA(0): TV Output Signal is S-Video (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) VIA(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) VIA(0): VESA BIOS detected (II) VIA(0): VESA VBE Version 3.0 (II) VIA(0): VESA VBE Total Mem: 32768 kB (II) VIA(0): VESA VBE OEM: VIA CLE266 (II) VIA(0): VESA VBE OEM Software Rev: 1.0 (II) VIA(0): VESA VBE OEM Vendor: (II) VIA(0): VESA VBE OEM Product: (II) VIA(0): VESA VBE OEM Product Rev: (--) VIA(0): Chipset: "CLE266" (--) VIA(0): Chipset Rev.: 3 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) VIA(0): mapping MMIO @ 0xdc000000 with size 0x9000 (--) VIA(0): mapping BitBlt MMIO @ 0xdc200000 with size 0x10000 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) VIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) VIA(0): videoram = 32768k (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) VIA(0): I2C bus "I2C bus 1" initialized. (II) VIA(0): I2C bus "I2C bus 2" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) VIA(0): VESA VBE DDC supported (II) VIA(0): VESA VBE DDC Level 2 (II) VIA(0): VESA VBE DDC transfer in appr. 1 sec. (II) VIA(0): VESA VBE DDC read successfully (II) VIA(0): Manufacturer: VSC Model: 5147 Serial#: 12167 (II) VIA(0): Year: 2001 Week: 15 (II) VIA(0): EDID Version: 1.2 (II) VIA(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) VIA(0): Signal levels configurable (II) VIA(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) VIA(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 (II) VIA(0): Gamma: 1.80 (II) VIA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) VIA(0): First detailed timing is preferred mode (II) VIA(0): redX: 0.595 redY: 0.350 greenX: 0.315 greenY: 0.575 (II) VIA(0): blueX: 0.150 blueY: 0.125 whiteX: 0.300 whiteY: 0.320 (II) VIA(0): Supported VESA Video Modes: (II) VIA(0): 640x480@60Hz (II) VIA(0): 800x600@60Hz (II) VIA(0): 1024x768@60Hz (II) VIA(0): Manufacturer's mask: 0 (II) VIA(0): Supported additional Video Mode: (II) VIA(0): clock: 65.0 MHz Image Size: 304 x 228 mm (II) VIA(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) VIA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) VIA(0): Serial No: GQ11512167 (II) VIA(0): Ranges: V min: 50 V max: 60 Hz, H min: 30 H max: 62 kHz, PixClock max 2550 MHz (II) VIA(0): Monitor name: VG150 (II) VIA(0): Monitor0: Using hsync range of 30.00-62.00 kHz (II) VIA(0): Monitor0: Using vrefresh range of 50.00-60.00 Hz (II) VIA(0): Clock range: 20.00 to 230.00 MHz (II) VIA(0): Not using default mode "640x350" (vrefresh out of range) (II) VIA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x400" (vrefresh out of range) (II) VIA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "720x400" (vrefresh out of range) (II) VIA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x480" (vrefresh out of range) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x480" (vrefresh out of range) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x480" (vrefresh out of range) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "800x600" (vrefresh out of range) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "800x600" (vrefresh out of range) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "800x600" (vrefresh out of range) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (vrefresh out of range) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (vrefresh out of range) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (vrefresh out of range) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (hsync out of range) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1152x864" (hsync out of range) (II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1280x960" (hsync out of range) (II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1280x1024" (hsync out of range) (II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1280x1024" (hsync out of range) (II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1280x1024" (hsync out of range) (II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1792x1344" (hsync out of range) (II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1856x1392" (hsync out of range) (II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "832x624" (vrefresh out of range) (II) VIA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1152x864" (hsync out of range) (II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1400x1050" (hsync out of range) (II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1400x1050" (hsync out of range) (II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1400x1050" (hsync out of range) (II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1400x1050" (hsync out of range) (II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1024" (hsync out of range) (II) VIA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1920x1200" (hsync out of range) (II) VIA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1280x960" (width too large for virtual size) (II) VIA(0): Not using default mode "1152x768" (width too large for virtual size) (II) VIA(0): I2C device "I2C bus 2:TV" registered at address 0x40. (II) VIA(0): I2C device "I2C bus 2:TV" removed. (II) VIA(0): I2C device "I2C bus 2:VT1622" registered at address 0x40. (II) VIA(0): I2C device "I2C bus 2:VT1622" removed. (--) VIA(0): Virtual size is 1024x768 (pitch 1024) (**) VIA(0): *Default mode "1024x768": 65.0 MHz (scaled from 0.1 MHz), 48.4 kHz, 60.0 Hz (II) VIA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) VIA(0): *Default mode "800x600": 40.0 MHz (scaled from 0.2 MHz), 37.9 kHz, 60.3 Hz (II) VIA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) VIA(0): *Default mode "640x480": 25.2 MHz (scaled from 0.2 MHz), 31.5 kHz, 60.0 Hz (II) VIA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) VIA(0): Default mode "800x600": 36.0 MHz (scaled from -0.2 MHz), 35.2 kHz, 56.2 Hz (II) VIA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) VIA(0): Display dimensions: (300, 230) mm (**) VIA(0): DPI set to (86, 84) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) VIA(0): Option: Cap0_FieldSwap Disabled (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xdc000000 - 0xdcffffff (0x1000000) MS[B] [1] 0 0 0xd8000000 - 0xdbffffff (0x4000000) MS[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xde004000 - 0xde004fff (0x1000) MX[B] [8] -1 0 0xde002000 - 0xde0020ff (0x100) MX[B] [9] -1 0 0xde001000 - 0xde0010ff (0x100) MX[B] [10] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [12] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) [13] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [14] -1 0 0xde003000 - 0xde003fff (0x1000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [21] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [22] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [23] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B] [24] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [25] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [26] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B] [27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] VIAScreenInit : V4L Enabled : fd = 6 (--) VIA(0): mapping framebuffer @ 0xd8000000 with size 0x2000000 (==) VIA(0): Write-combining range (0xd8000000,0x2000000) (--) VIA(0): Frame buffer start: 0x402c0000, free start: 0x180000 end: 0x2000000 (--) VIA(0): mapping MMIO @ 0xdc000000 with size 0x9000 (--) VIA(0): mapping BitBlt MMIO @ 0xdc200000 with size 0x10000 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) VIA(0): I2C device "I2C bus 2:TV" registered at address 0x40. (II) VIA(0): I2C device "I2C bus 2:TV" removed. (II) VIA(0): I2C device "I2C bus 2:TV" registered at address 0x40. (II) VIA(0): I2C device "I2C bus 2:TV" removed. (II) VIA(0): 3D Engine has been initialized. FillGraphicInfo!! (II) VIA(0): VIAInternalScreenInit (II) VIA(0): Clipping pixmap cache for old DRI/DRM module. (II) VIA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Screen to Screen color expansion Solid Lines Dashed Lines Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots 32 8x8 color pattern slots (==) VIA(0): Backing store disabled (**) Option "dpms" (**) VIA(0): DPMS enabled drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmGetBusid returned '' (II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0" (II) VIA(0): [drm] added 8192 byte SAREA at 0xe3921000 (II) VIA(0): [drm] mapped SAREA 0xe3921000 to 0x40030000 (II) VIA(0): [drm] framebuffer handle = 0xd8000000 (II) VIA(0): [drm] added 1 reserved context for kernel (II) VIA(0): [drm] drmAgpEnabled succeeded (II) VIA(0): [drm] agpAddr = 0xd0000000 (II) VIA(0): [drm] agpBase = (nil) (II) VIA(0): [drm] agpAddr = 0xd0000000 (II) VIA(0): [drm] agpSize = 0x02000000 (II) VIA(0): [drm] agp physical addr = 0x00000000 (II) VIA(0): [dri] use agp. (II) VIA(0): [drm] FBFreeStart= 0x00400000 FBFreeEnd= 0x01fbe000 FBSize= 0x01bbe000 (II) VIA(0): [dri] frame buffer initialized. (II) VIA(0): [dri] visual configs initialized. (II) VIA(0): [drm] register handle = 0xdc000000 (II) VIA(0): [drm] mmio Registers = 0xdc000000 (II) VIA(0): [dri] mmio mapped. (II) VIA(0): X context handle = 0x00000001 (II) VIA(0): [drm] installed DRM signal handler (II) VIA(0): [DRI] installation complete (II) VIA(0): [dri] kernel data initialized. (II) VIA(0): direct rendering enabled FillGraphicInfo!! (II) VIA(0): Benchmarking video copy. Less is better. (--) VIA(0): Timed libc YUV420 copy... 3893088. Throughput: 152.4 MiB/s. (--) VIA(0): Timed kernel YUV420 copy... 3886564. Throughput: 152.6 MiB/s. (--) VIA(0): Timed SSE YUV420 copy... 1883895. Throughput: 314.9 MiB/s. (--) VIA(0): Timed MMX YUV420 copy... 2614173. Throughput: 226.9 MiB/s. (--) VIA(0): Ditch 3DNow! YUV420 copy... Not supported by CPU. (--) VIA(0): Timed MMX2 YUV420 copy... 1902709. Throughput: 311.7 MiB/s. (--) VIA(0): Ditch Ezra YUV420 copy... Not supported by CPU. (--) VIA(0): Using SSE YUV42X copy for video. (II) VIA(0): I2C device "I2C bus 2:TV Probe" registered at address 0x88. (II) VIA(0): I2C device "I2C bus 2:SAA7113H" removed. (II) VIA(0): I2C device "I2C bus 2:SAA7113H" removed. (II) VIA(0): I2C device "I2C bus 2:SAA7114H" removed. (II) VIA(0): I2C device "I2C bus 2:TV Probe" removed. (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "PS/2" (**) Mouse0: Protocol: "PS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) Mouse0: ps2EnableDataReporting: succeeded